Login to your account

Username
Password *
Remember Me

Create an account

Fields marked with an asterisk (*) are required.
Name
Username
Password *
Verify password *
Email *
Verify email *

R Dan and Co Inc

Paper Machinery

• Up to 300 TPD
• For thickening stock up to 45%
• For installation with disperging systems
• For installation with wet lap machines
• For removal of ash and ink
• Up to 3.5 m wide, 200 tpd
• Up to 800m/min
• For removal of metal and non-metal particles up to 6% consistency
• 100% efficiency by slot screening up tp 2mm
• Auto reject system
• In stainless steel construction or cladded design
• With or without defined retention time
• For the thickening of sludge up to 35%
• Up to 3.5m wide
• For pulp and waste paper in bales or loose
• Up to 2000 mm wide
• With or without weighing device

Isolating and non-isolating
Integral cleaning system with brush

Integral drain system for debris
Easy Nozzle replacement for high and low pressure application
Industrial quality

R. Dan's shower Systems are specifically designed according to our clients needs. They are engineered and manufactured using German quality standards, for durability and ease of operation.

The shower nozzles are kept open by turning the handwheel. The handwheel also acts as a valve for the water to drain off the debris. Using this established system, maintenance is kept at a minimum assuring your machine is running efficiently and kept at optimum condition.

 

• For good house keeping of rejects
• For thickening of rejects up to 50% with a press
• High consistency pulpers up to 300 tpd, 16%
• Low consistency pulpers, continuous and batch type, up to 500 tpd, 4 – 6%
• For high efficiency removal of heavy rejects like stones, and staples, and etc.
• Using combination of High Density and Low Density Cleaners
• Proper engineering of piping runs to prevent interference
• Optimal sizing and arrangement for power savings
• For uniform process conditions
Showers
• With internal cleaning brushes
• Fixed and oscillating Doctors
• Conventional and conformatic holders Pneumatic guides Stretchers
• Manual or motorized
• Fixed or Pneumatically loaded Uhle boxes
• Plastic or ceramic covers
• For removal of sand and dirt particles
• 0.5% to 2.0% consistency
• With special rejects chamber for fiber savings
• Pressurized and non pressurized screens for all stages
• Holes or slotted baskets
• Foil, bump, or lobe rotor
• 1% - 3% consistency
• For conveying of stock above 6%
• For for heating and mixing of stock
• Up to 1200 mm dia, 9 meters long
• Up to 3.5 m width
• For pre- thickening of sludge to 10 – 13%
• For the removal of coarse contaminants during continuous pulping and feeding back usable fiber to the pulper
• For fiber recovery from pulper discharger and screens
• Up to 300 TPD
• For thickening stock up to 45%
• For installation with disperging systems
• For installation with wet lap machines
• For high efficiency dispersing of ink and dirt particles
• At 28 – 32%, high temperature up to 95 deg C
• Up to 350 tpd
• For pulper discharging, 6 – 12 mm dia.
• For Hole screening, 1.2mm dia to 3.0 mm dia.
• For the removal of ink by air injection and floatation
• With optional foam breaker
• With optional system with 40% less power
• Up to 700 tpd
• For process water clarification by dissolved air floatation method
• For Fiber Savings in white water loops
• Up to 15m dia.
• Featuring high efficiency radial design
• Air injection by venturi – non plugging
• Air dissolving tank for poduction of fine bubbles
• Efficient chemical mixing system

 

• For removal of sand and dirt particles
• 0.5% to 2.0% consistency
• With special rejects chamber for fiber savings
• For the removal of rejects from waste water in a canal
• Use before effluent tretament to prevent pump clog ups

 

• For bleaching of stock and retention at 30-40%
• Discharge at 4.5 – 5.5%
• Optional distributor at the top for uniform retention

Follow us

      

We have 34 guests and no members online

20 Alfonso St., Rosario,
Pasig City 1609 Philippines
TEL. +63.2.656.2298-99
FAX. +63.2.656.2089/ +63.2.470.7890
This email address is being protected from spambots. You need JavaScript enabled to view it.